Frequently Asked Questions


The only maintenance to this roof system is the topcoat. It is a polymer coating developed for our system and will last 10-15 years. If you see the grey roofing material coming through it is time for a new white topcoat. This is a product that can be applied by you or you can bring it back to a location for reapplication.

You do not have to caulk your roof or apply special cleaners or conditioners on the RV FlexArmor(R) roof system.

You can use any kind of household cleaner you want. This roof system has an extremely high chemical resistance and is not effected by cleaners or bleach. It is designed to be “self cleaning” which means most everyday dust and dirts wash off when it rains. It is non porus so it resists many stains and mildew.
This roof system was designed to remove all the caulking joints and seams in an rv roof. You no longer have any exposed screws or joints to caulk. Our chemical bond removes the need for caulking.
RV FlexArmor(R) is a pure polyurea designed for RV use. To read more on the differences between our system and other polyureas, go to our page, RV FlexArmor.
RV FlexArmor(R) is a product that requires a special machine to spray it. There is so much equipment involved and due to overspray, it is not an application to be done outside. We also have a lot of prep work to do on the roof and we remove things such as A/Cs and vent lids so we do all work in a controlled environment. Since our equipment, product and prep processes are different than onsite products, we do all work in a fixed, indoor location.
When we do your roof we replace all your vent pipes and lids, refrigerator base and lids, standard vent lids, install new Camco vent covers and new a/c gaskets. Your new bases are sealed in under the product so they will last as long as the roof.

If you ever need to replace something for some reason or add something such as solar panels, we can remove the component, install a new one and respray just that area that was cut through. If you are somewhere else at the time, grind or cut through the coating to get the part out, replace it and caulk it until you can get back to an approved RV FlexArmor(R) facility for respraying.

RV FlexArmor(R) has over 600% elongation. This makes it extremely flexible and provides is with more than enough movement to move with your RV and during temperature changes. The strength is over 3500 psi tear strength which makes it next to impossible to puncture or snag and cause a tear. Our thickness is 187 mils or 3/16 of an inch thick.

Below are some pictures of RV FlexArmor on the left stacked next to most common RV roofing Materials.

Fiberglass – 25 mil
Rubber – 27 mil
Rolled Polymer – 28 mil
Vinyl (TPO) – 45-60 mil

Get a Quote Now

We'd love to provide you with a free quote to re-roof your RV.